Build a Solar Panel Easily
It may sound very complicated and complex but the truth is that anybody can build a solar panel for on their own easily and cheaply. At least you will be sure to save a sizable amount of money that you would have otherwise used had you chosen to make your purchase from a shop.
A solar panel is actually just a box containing a collection of photo voltaic tissues. These tissue are what turn daylight into electricity. Actually by far the most challenging task you will face in this challenge is how to get the photo voltaic tissue at an affordable price. And what is more is the fact that you need many of these tissues to produce a significant amount of electricity.
You can actually get used and half damaged photo voltaic tissues at very good prices on Ebay. These damaged tissues will still create a solar panel that performs fine.
smaller solar cells produce less energy and larger ones naturally produce much more. However you need to be wary of the fact that larger tissues will necessitate you building a much larger, heavier and bulkier solar panel. smaller tissues will result in a panel that is much more compact and lighter, but it will also produce much less electricity. And so you will have to strike a balance among the two. Also keep in mind that tissue of the same type will end up producing the same voltage irrespective of size.
Next you will need to construct a shallow wooden box where you will assemble all the photo voltaic tissues and join them together in series. You will need to glue the solar cells into spot. The reason why it is important for the box to be shallow is so that the sides will not create a shadow and shield the tissue from receiving daylight when the sun is at an angle pointing to the panel from the sides.
It will be a good idea to give the wooden parts numerous coats of renovate to protect it from the elements that it will be exposed to for a very long time.
Do not forget the fact that each solar panel in the solar energy method that you will set up calls for a blocking diode to stop the current from circulating back to the panel at night or when it is extremely cloudy.
The final step for your home made solar panel is to drill holes at the back of the shallow box and let the wires go through there.
You will need to test your panel in daylight to see the amount of energy it generates. When you are done with this, it is time to mount your panel on the roof and to wire it to your battery bank so that it expenses them which is a way of Saving energy until the time you will need it.
You have now completed your mission to build a photo voltaic panel for yourself and at this point you will be amazed at how easily you managed to complete a task that looked tremendously complex and hard to achieve before you started out.
